Blur several faces in one video
Cover every detected face, or leave selected face tracks visible after analysis. The covered tracks share one effect, strength, and margin. Review each person’s appearances because one person can split into several tracks.
Updated November 5, 2026
Cover all detected faces
- Choose an MP4, MOV, or WebM clip up to 90 MB in FaceBlur.
- Choose mosaic, soft blur, or solid cover. Select Analyze and review faces. Thorough is the default; the quick preview before analysis uses Fast.
- Leave Cover this track checked for every track. Play and scrub through the analyzed masks, paying attention to background people and crossings.
- Correct any tight or misplaced masks, add covers for missed faces, then export and download the video.
- Watch the full downloaded file and follow each person through every appearance.
Leave one person visible while covering others
For a two-person clip, keep coverage on for the person you want hidden and turn it off for the person you want visible. Use the analyzed tracks rather than the initial quick preview.
- Analyze the clip. Select Analyze and review faces and wait for the track controls.
- Select a face in the Track menu. FaceBlur moves the playhead to that track’s start. Play or scrub within its time range to confirm which face it follows.
- Uncheck Cover this track. This removes that track’s cover. Leave it checked for the tracks you want to hide.
- Check the person’s other appearances. Repeat for any additional tracks belonging to the person you want visible. Tracks can split after turns, obstructions, or cuts; they do not identify unique people.
- Review crossings and overlapping masks. A different covered track can overlap the person you left visible. Correct the coverage and inspect the downloaded export.

See two faces covered in the same shot
This licensed stock clip shows the shared mosaic effect on both faces. It demonstrates automatic multi-face coverage; use the steps above to leave a track visible.
Source: Two coworkers facing the camera by Theo Decker, used under the Pexels License. Demo settings and source notes.
Correct a missing or misplaced cover
| Problem | What to do |
|---|---|
| A mask is too tight | Increase Safety margin, or adjust that track’s Width and Height at the affected time. |
| A mask drifts during a crossing | Select the track and set horizontal and vertical adjustments at the affected times. Replay the frames between saved positions. |
| A face has no mask | Select Add moving cover, set its Start time and End time, then set its position and size along the face’s path. |
| A covered person reappears without a mask | Check for another track and verify Cover this track is checked. Add a moving cover if detection missed that appearance. |
See the moving-cover walkthrough for the exact fields. Strength and margin cannot create a mask where no face was detected.
Frames to check with several people
- Entrances and exits: inspect the first and last visible face frames.
- Crossing paths: pause where people overlap or pass behind one another.
- Scene cuts: inspect both sides of every cut and any new tracks.
- Background faces: inspect distant people, screens, and reflections.
- Profiles and obstructions: check turns, looking down, hands, and hair.
- Other identifiers: decide whether voices, names, badges, or clothing also need attention.
The track count is not a count of different people. A matching mask count is not proof of correct coverage. The stock-footage benchmark includes measured misses and misplaced masks.
Review a clip with several people
Analyze, choose which tracks to cover, correct the masks, then watch the downloaded result.
Choose a videoRelated tools
For several clips, use batch video face blur. For a folder of photos, use batch image face blur; choose the single-image editor when you need individual manual corrections.